Linkskey LKV-S02SK Bedienungsanleitung PDF herunterladen

Quick Installation Guide

Applicable models: LKV-S02SK/LKV-S04SK

* Note that the length of the Slim 3-in-1 KVM combo cable could vary according to your package.

LKV-S02SK/LKV-S04SK

2/4-port Super Slim Desktop KVM Switch

QUICK INSTALLATION GUIDE

Thank you for purchasing the

LKV-S02SK/LKV-S04SK Super

Slim Desktop KVM Switch ! With our highly reliable and

quality product, user can enjoy countless benefits from using it.

LKV-S02SK LKV-S04SK

The Slim 3-in-1 KVM Combo Cable *

(with integrated all-in-one connector on Switch side)

Introduction

The

LKV-S02SK/LKV-S04SK SuperSlimDesktopKVMSwitch is

a 2-/4-port PS/2 type KVM Switch that provides compact and

integrated all-in-one KVM connectors on the Switch side. It

enables user to access, control, boot and reboot multiple

computers using only one keyboard, video and mouse. LKV-

S02SK/LKV-S04SK is of a slim form factor to save your

space from over-cluttering with all sorts of cable connectors.

The slim 3-in-1 combo KVM cable is tailored-made to integrate

keyboard, video and mouse interfaces all into one connector,

thus saving a lot of clumsy movements to make all connectors

within good order. It can be your best companion for the

management of 2 ~ 4 computers on either SOHO or corporate

desktop.

Before you install

The default setting of the

LKV-S02SK/LKV-S04SK Super

Slim Desktop KVM Switch

is appropriate for most systems.

you do not need to configure the KVM Switch before

installation. It’s a Plug-and-Play device: First, connect the

shared keyboard, video and mouse to your KVM Switch and

then connect PCs to your KVM Switch using the slim 3-in-1

combo KVM cables. Then boot up your PCs one by one, and

you can start to operate the KVM Switch immediately!

For a quick start on installation and operation, please follow

the instructions below.

The correct setup sequence is ……

(1) Connect the shared keyboard, mouse and monitor to the

KVM Switch and then connect the KVM Switch to the

computers using the slim 3-in-1 combo KVM cable (with

integrated all-in-one connector on Switch side).

(2) Power up your connected computers one by one …

Since the KVM Switch receives power from the computer’s PS/2

interface, it is powered up when you connect the KVM cables to a PC.

Out-of-the-box Installation

Take the Super Slim Desktop KVM Switch out of the box and

begin installation….

Before connecting any cable to your KVM Switch, please make

sure all of your computers and their peripherals have been powered off.

Otherwise, the Switch system might not be set up properly.

Step 1. Make sure all the computers that are to be connected

to the KVM Switch and their peripherals are in

powered-off state. If not, power them off before you

proceed with the following steps.

Step 2. Connect the shared keyboard, monitor and mouse to

the corresponding connectors on the rear of your

KVM switch.

Step 3. Connect each of your computers to the KVM Switch

using the slim 3-in-1 combo KVM cable. You can use

individual standard keyboard, mouse and video

cables for extension. Depending on the cable you use,

the maximum cable distance is limited to 5 ~ 7 meters

(15.5 ~23 feet).

Since the KVM Switch is powered th

rough the PS/2 in

terface, it is

powered on immediately when connected to the PS/2 keyboard/mouse

port of your PC (nonetheless when the PC being in powered off state).

Step 4

. (

Now your KVM Switch should have been powered-

up….

) Power up the connected computers, and the

keyboard and mouse should be recognized. Now you

can begin operating the KVM switch.

DO NOT TRY

to connect the KVM Switch to the computers

while the computers are still in powered-on states. Otherwise, the

computer will have difficulty recognizing your shared keyboard and

mouse.

Easy Operation

There are two methods to select

a specific computer: using the

push buttons or

a keyboard

hotkey sequence.

Push buttons

The push buttons let you have di

rect control over KVM switch

operation and channel switching. Simply press the button to

switch to a specific channel.

See Quick Reference Sheet

Keyboard hotkeys

A keyboard hotkey sequence consists of three specific

keystrokes:

See

Quick Reference Sheet

Hotkey sequence = ScrLk + ScrLk + Command key

Keystrokes of a hotkey sequence should follow one another

within 2 seconds. Otherwise, the hotkey sequence will not be validated.

For detailed Hotkey sequences and their corresponding functional

commands, please refer to the Quick reference sheet.

side

Switch side

1 2

Inhaltsverzeichnis

Seite 1 - QUICK INSTALLATION GUIDE

Quick Installation Guide

Seite 2 - Quick Reference Sheet

Quick Reference Sheet

Verwandte Modelle: LKV-S04SK

Kommentare zu diesen Handbüchern

Keine Kommentare

Linkskey LKV-S02SK Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Linkskey LKV-S02SK herunter. Linkskey LKV-S02SK User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: LKV-S04SK

Kommentare zu diesen Handbüchern