Linkskey LKV-7308 Bedienungsanleitung PDF herunterladen

Active Sync Replication (A.S.R) for all-time full DDC emulation

User-definable Hotkey Preceding Sequence

Factory Default Restore Hotkey

LKV-7308 / LKV-7308-KIT

LKV-7316 / LKV-7316-KIT

8/16-port 19” USB PS/2 Rackmount KVM Switch

Quick Installation Guide

LKV-7308 LKV-7316

LKV-7308 / LKV-7316

Rackmount USB PS/2 KVM Switches

Thank you for purchasing the LKV-7308 / LKV-7316 8-Port/16-Port

Rackmount USB PS/2 KVM Switch! With our highly reliable and

quality product, user can enjoy countless benefits from using it.

Introduction

The LKV-7308/LKV-7316 Rackmount USB PS/2 KVM switch supports

USB interface and legacy PS/2 interface on both console side and PC

side. You can use either PS/2 or USB keyboard/mouse on the console

side as well as either PS/2 or USB interfaces on the PC side. It is

especially useful when your server room is inhabited with legacy

computers with only PS/2 interfaces and yet with some newer

computers equipped with only USB interfaces.

The rackmount design offers a neat placement of the KVM switch

units on the rack for centralized management and also for security

enhancement that could be provided by a locked server room. You

can simply place it on desktop or mount it on a standard 19” rack for

more secured and centralized management.

To ensure ultimate video compatibility requirements on recent

operating systems, such as Windows 7 and Mac OS X, this KVM

switch features advanced Active Sync Replication (A.S.R)

technology which supports all-time full DDC emulation so that the

video compatibility will be as constant and stable as it should be, no

matter how you switch. This all-time full DDC emulation can get rid of

those problems that are related to the absence of appropriate DDC

data on the KVM switch when port switching is taken place.

Out-of-the-box Installation

Take the KVM Switch out of the box and begin installation.

1. Set up your local console: Connect the shared keyboard, mouse

and VGA monitor to the console connectors on the backpanel of

your KVM switch. (Note: keep KVM switch power off at this step).

2. Power on the console VGA monitor: Plug in the power cable of

monitor and turn on the monitor.

3. Power on the KVM switch: Power on the KVM switch by

plugging in the provided power adapter to the power jack on the

backpanel.

4. Connect servers/ computers to the KVM switch:

i. Make sure computers that are to be connected to the KVM

switch are powered off.

ii. Use our special 3-in-1 KVM combo cable (see below image)

to connect each of your computers to the PC ports at the

backpanel of the KVM switch. When connecting with a PS/2

computer, just add an USB-to-PS/2 adapter to the USB

connector and you’ll have a PS/2 connector for mouse. When

connecting with a USB computer, just plug the USB connector

to computer and leave the PS/2 connector free. Do not

connect both USB connector without adapter and PS/2

connector to a computer at the same time.

C-KVM-SC6/10/15

Special integrated USB & PS/2 KVM combo cable

iii. Select the desire port first then power on the connected

computer.

5. Repeat step 4 and 5 for the remaining computers.

Connection Diagram

After your computer is powered up, the keyboard and mouse will be

recognized and now you can begin operating the switch.

Note: If you experience mouse lock on any of your computer, you can

use the mouse reset hotkey sequence to regain the mouse control

(see the Quick Reference Sheet).

Operation

There are two methods to select a specific computer, using a front-

panel push button or a hotkey sequence.

Front-Panel Push Buttons

The front-panel buttons let you have direct control over KVM switch

operation and port switching. Simply press a button to switch to its

corresponding port. See the Quick Reference Sheet.

Keyboard Hotkeys

A keyboard hotkey sequence consists of at least three specific

keystrokes: (See the Quick Reference Sheet)

Hotkey sequence = [ScrLk]

+ [ScrLk]

+ Command key(s)

* User-definable = SCROLL LOCK, CAPS, F12 or NUM LOCK

Hotkey preceding sequence configuration: For users who want to

use a preceding sequence other than two consecutive Scroll Locks,

there is also one convenient way to configure it. (1)Hit ScrollLock +

ScrollLock + H, then two beeps will signal readiness for new

preceding sequence selection [or Press and hold down the last front-

panel button (Button 8 or 16) until you hear two beeps, release the

button.] (2) Select and press the key you would like to use as your

preceding sequence (SCROLL LOCK, CAPS, F12 or NUM LOCK

keys are available for selection) and you’ll hear a beep for selection

confirmation. Now you can use the new preceding sequence to

execute your hotkey commands.

Note: The two consecutive ScrLk (scroll lock) keystrokes should be

pressed within 2 seconds and the following command key(s) should

also be pressed within 2 seconds in likewise manner. Otherwise, the

hotkey sequence will not be validated.

For detailed Hotkey sequences and their corresponding functional

commands. See the Quick Reference Sheet.

Using

USB co

nnection

Connect USB and VGA

connectors to computer.

Connect to

PC port at

the backpanel

of the KVM

switch

Using

PS/2 connection:

Connect PS/2 keyboard, VGA,

and USB with USB-to-PS/2

adapter to computer.

Connect to

PC port at

the backpanel

of the KVM

switch

1 2

Inhaltsverzeichnis

Seite 1 - Quick Installation Guide

Seite 2 - Quick Reference Sheet

Verwandte Modelle: LKV-7308-KIT | LKV-7316 | LKV-7316-KIT |

Kommentare zu diesen Handbüchern

Keine Kommentare

Linkskey LKV-7308 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Linkskey LKV-7308 herunter. Linkskey LKV-7308 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: LKV-7308-KIT | LKV-7316 | LKV-7316-KIT |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Linkskey LKV-7308